Clean your Vacuum Brush Roller I

The vacuum brush roller is very useful for all kinds of floors and carpets, so it needs a regular cleaning for an excellent performance.

Step 1 – Switch off Your Machine

Never perform any maintenance work with the vacuum cleaner plugged in and switched on.

Step 2 – Remove the Base Plate

Remove or open the base plate of the machine. This plate will be held by twist catches or screws and will either be removed altogether or be hinged so that it can swing out of the way.

Step 3 – Remove the Brush Roller

The brush roller will be held in place by two levers that will swing through 90-degrees or more. The brush roller will simply slide out of its housing bringing with it the drive belt. Slide the drive belt off the roller brush and check it for wear and tear.

Step 4 – Clean the Brushes

The brushes that are angled around the brush roller need to be cleaned. This is best done by using the pointed end of a pair of scissors or a knitting needle to remove as much of the dirt and fibres as possible, to ensure a fantastic clean result.

Step 5 – Replace the Brushes

The brushes on the brush roller can wear out and may need replacing. The brushes fit into specially shaped slots in the roller and can be simply slid out when the bearings have been removed.

Companies offering end of tenancy cleaning are using the most advanced in design and performance tools and machines.

No related articles found.

September 1, 2011 | Author: | Posted in Cleaning


This author has published 142 articles so far. More info about the author is coming soon.

Leave a Reply

You must be logged in to post a comment.